On the Transport Capability of LAN Cables in All-Analog MIMO-RoC Fronthaul

Centralized Radio Access Network (C-RAN) architecture is the only viable solution to handle the complex interference scenario generated by massive antennas and small cells deployment as required by next generation (5G) mobile networks. In conventional C-RAN, the fronthaul links used to exchange the signal between Base Band Units (BBUs) and Remote Antenna Units (RAUs) are based on digital baseband (BB) signals over optical fibers due to the huge bandwidth required. In this paper we evaluate the transport capability of copper-based all-analog fronthaul architecture called Radio over Copper (RoC) that leverages on the pre-existing LAN cables that are already deployed in buildings and enterprises. In particular, the main contribution of the paper is to evaluate the number of independent BB signals for multiple antennas system that can be transported over multi-pair Cat-5/6/7 cables under a predefined fronthauling transparency condition in terms of maximum BB signal degradation. The MIMO-RoC proves to be a complementary solution to optical fiber for the last 200m toward the RAUs, mostly to reuse the existing LAN cables and to power-supply the RAUs over the same cable

Self-Adaptive Power Control Mechanism in D2D Enabled Hybrid Cellular Network with mmWave Small Cells: An Optimization Approach

Millimeter wave (mmWave) and Device-to-Device (D2D) communications have been considered as the key enablers of the next generation networks. We consider a D2D-enabled hybrid cellular network compromising of $\mu W$ macro-cells coexisting with mmWave small cells. We investigate the dynamic resource sharing in downlink transmission to maximize the energy efficiency (EE) of the priority, or cellular users (CUs), that are opportunistically served by either macrocells or mmWave small cells, while satisfying a minimum quality-of-service (QoS) level for the D2D pairs. In order to solve this problem, we first formulate a self-adaptive power control mechanism for the D2D pairs subject to the interference threshold constraint set for the CUs, while maintaining its minimum QoS level. Subsequently, the original EE optimization problem, which aimed at maximizing the EE for both CUs and D2D pairs, has been broken up into two subproblems that manage the radio resource allocation for D2D pairs and maximize EE exclusively for CUs, in that order. We then propose an iterative algorithm to provide a near-optimal EE solution for CUs

Drone-Aided Communication as a Key Enabler for 5G and Resilient Public Safety Networks

Wireless networks comprising unmanned aerial vehicles can offer limited connectivity in a cost-effective manner to disaster-struck regions where terrestrial infrastructure might have been damaged. While these drones offer advantages such as rapid deployment to far-flung areas, their operations may be rendered ineffective by the absence of an adequate energy management strategy. This article considers the multi-faceted applications of these platforms and the challenges thereof in the networks of the future. In addition to providing an overview of the work done by researchers in determining the features of the air-to-ground channel, the article explores the use of drones in fields as diverse as military surveillance and network rehabilitation for disaster-struck areas. It also presents a case study that envisages a scenario in which drones operate alongside conventional wireless infrastructure, thereby allowing a greater number of users to establish a line-of-sight link for communication. This study investigates a power allocation strategy for the microwave base station and the small base stations operating at 28 GHz frequency band. The self-adaptive power control strategy for drones is dependent on the maximum allowable interference threshold and minimum data rate requirements. This study highlights the importance of incorporating the drones in the multi-tier heterogeneous network to extend the network coverage and capacity

Energy-Aware Radio Resource Management in D2D-Enabled Multi-Tier HetNets

Hybrid networks consisting of both millimeter wave (mmWave) and microwave (μW) capabilities are strongly contested for next-generation cellular communications. A similar avenue of current research is device-to-device (D2D) communications, where users establish direct links with each other rather than using central base stations. However, a hybrid network, where D2D transmissions coexist, requires special attention in terms of efficient resource allocation. This paper investigates dynamic resource sharing between network entities in a downlink transmission scheme to maximize energy efficiency (EE) of the cellular users (CUs) served by either (μW) macrocells or mmWave small cells while maintaining a minimum quality-of-service (QoS) for the D2D users. To address this problem, first, a self-adaptive power control mechanism for the D2D pairs is formulated, subject to an interference threshold for the CUs while satisfying their minimum QoS level. Subsequently, an EE optimization problem, which is aimed at maximizing the EE for both CUs and D2D pairs, has been solved. Simulation results demonstrate the effectiveness of our proposed algorithm, which studies the inherent tradeoffs between system EE, system sum rate, and outage probability for various QoS levels and varying densities of D2D pairs and CUs

Offshore Wind Farm-Grid Integration: A Review on Infrastructure, Challenges, and Grid Solutions

Recently, the penetration of renewable energy sources (RESs) into electrical power systems is witnessing a large attention due to their inexhaustibility, environmental benefits, storage capabilities, lower maintenance and stronger economy, etc. Among these RESs, offshore wind power plants (OWPP) are ones of the most widespread power plants that have emerged with regard to being competitive with other energy technologies. However, the application of power electronic converters (PECs), offshore transmission lines and large substation transformers result in considerable power quality (PQ) issues in grid connected OWPP. Moreover, due to the installation of filters for each OWPP, some other challenges such as voltage and frequency stability arise. In this regard, various customs power devices along with integration control methodologies have been implemented to deal with stated issues. Furthermore, for a smooth and reliable operation of the system, each country established various grid codes. Although various mitigation schemes and related standards for OWPP are documented separately, a comprehensive review covering these aspects has not yet addressed in the literature. The objective of this study is to compare and relate prior as well as latest developments on PQ and stability challenges and their solutions. Low voltage ride through (LVRT) schemes and associated grid codes prevalent for the interconnection of OWPP based power grid have been deliberated. In addition, various PQ issues and mitigation options such as FACTS based filters, DFIG based adaptive and conventional control algorithms, ESS based methods and LVRT requirements have been summarized and compared. Finally, recommendations and future trends for PQ improvement are highlighted at the end

1 GS/s, Low Power Flash, Analog to Digital Converter in 90nm CMOS Technology

The analog to digital converters is the key components in modern electronic systems. As the digital signal processing industry grows the ADC design becomes more and more challenging for researchers. In these days an ADC becomes a part of the system on chip instead of standalone circuit for data converters. This increases the requirements on ADC design concerning for example speed, power, area, resolution, noise etc. New techniques and methods are going to develop day by day to achieve high performance ADCs. Of all types of ADCs the flash ADC is not only famous for its data conversion rate but also it becomes the part of other types of ADC for example pipeline and multi bit Sigma Delta ADCs. The main problem with a flash ADC is its power consumption, which increases in number of bits. This thesis presents the comparison of power consumption of different blocks in 1Gbps flash ADCs for 2, 4 and 6 bits in a 90nm CMOS technology. We also investigate the impact on power consumption by changing the design of decoder block

Risk factors, causative organisms and sensitivity patterns of infective keratitis in a tertiary care hospital in Rawalpindi

Objective: To determine the risk factors, causative organisms, sensitivity patterns and treatment outcomes of infective corneal ulcers. Methods: The is a prospective cohort study carried out from January 2018 to December 2019 at the Department of Ophthalmology, Fauji Foundation Hospital (FFH) Rawalpindi. A total of 65 eyes of 65 patients of corneal ulcer meeting the inclusion criteria were evaluated and corneal scrapes were sent for microbiological assessment.  Variables studied were age, gender, risk factors, onset and duration of symptoms, best corrected visual acuity (BCVA), treatment and complications. Results: Out of 65 eyes of 65 patients, 40 (61.5%) were females and 25 (38.4%) were males. Most common local risk factor was ocular surgery (29.2%) followed by ocular trauma (23.1%). Diabetes was present in 44.6% of the cases. Culture results after corneal scrapings were positive for 39 (60%) of the total samples, while 26 (40%) had no growth. Bacterial growth was present in 51.3% of eyes, fungal in 28.2% while 20.5% of the eyes were infected with polymicrobial organisms. Most common pathogens were Pseudomonas (25.6%) that were most sensitive to ciprofloxacin. By the end of the follow-up period 40 cases (61.5%) showed improvement. Conclusion: This study concluded that isolated Pseudomonas was the most common pathogen. Prompt diagnosis with culture sensitivity tests are very much needed in developing countries to avoid blindness due to keratitis. Keywords: Infective keratitis, risk factors, corneal ulcer, culture sensitivity